HP BladeSystem c-Class Virtual Connect Support Utility Version 1.3.
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software.
Contents Introduction .................................................................................................................................. 4 Overview ................................................................................................................................................. 4 Requirements ............................................................................................................................................ 4 Restrictions and limitations...............
Introduction Overview The HP BladeSystem c-Class Virtual Connect Support Utility enables administrators to upgrade VC-Enet and VC-FC firmware, and to perform other maintenance tasks remotely on both HP BladeSystem c-Class c7000 and c3000 enclosures using a standalone, Windows-based command line utility. When the utility initiates a firmware upgrade process, all modules are updated at the same time. The utility displays a progress message indicating that an update is in progress and the percentage completed.
• Onboard Administrator firmware 1.30 or higher is required on the target enclosure. OA firmware version 2.25 is recommended. • Only one instance of the VC Support Utility accessing a single enclosure can be run on a single client at one time. • During firmware update operations, the modules are unavailable for use. Any attempt to reset or remove the modules during the update process could result in a corrupted firmware image.
Usage Use the following steps to install and run the HP BladeSystem c-Class Virtual Connect Support Utility. 1. Install the application on the client system by running SETUP.EXE. 2. After the program is installed, click Start>Programs>Hewlett-Packard>Virtual Connect Support Utility to start a console. o To display the top-level help and available options, enter vcutil. o To display version syntax and available options, enter vcutil -a version.
OA Password :***********
Commands collect Contact the OA using the supplied credentials and execute a SHOW ALL from the OA CLI, saving the output to an "oaShowAll.txt" file in the current directory. This support action also contacts the primary VC Manager using the supplied credentials and executes the following commands, saving the output to a "vcmShowAll.
Item Description Syntax vcutil -a discover -s -e Parameters: START IP First IP address in the range to search END IP Last IP address in the range to search Example Discover an enclosure in a certain address range: vcutil -a discover -s 192.168.1.100 -e 192.168.1.200 configbackup Log into VC Manager using the supplied credentials and access Virtual Connect to request a configuration download.
o Module Configuration: In Sync, Not In Sync, Invalid o Domain Configuration (for primary or backup VC-Enet modules): In Sync, Not In Sync The primary Virtual Connect manager saves the domain configuration data to the backup module in a VC domain at a regular interval. The 'Domain configuration' state displayed indicates whether this data is in sync or not between the two modules.
report Display the current running firmware version on all modules in a specific target enclosure, plus display the VC-Enet and VC-FC firmware versions provided in the specified VC package file, and whether or not the module can be updated. In addition to displaying the module firmware version and status, the report command also displays details about the VC package contents. Because the package version details are displayed, the user must provide a VC package file as part of the input at the command line.
supportdump Log into VC Manager using the supplied credentials and access Virtual Connect to request a support information (debug dump) download. VCSU saves that file in the current directory as the file name supplied by Virtual Connect. A functioning VC Manager domain is required for this action.
Item Description VCM USER Name of the Virtual Connect user with Domain privileges. This command is required if an enclosure is in a Virtual Connect domain. VCM PASS Password for the Virtual Connect user -q Optional. Specifies that the firmware update does not prompt for confirmation before updating, and uses the default answer for the confirmation (YES) -oe Optional. Specifies VC-Enet module activation order.
vcutil –a update –i 192.168.1.100 –u Administrator –p password –l http://www.myserver.com/vcfw-120.bin Perform an update using a firmware image from an FTP server on the network: vcutil –a update –I 192.168.1.100 –u Administrator –p password –l ftp://user:password@192.168.1.10/vcfw-120.bin version Display the current running firmware version on all modules in a specific target enclosure.
Troubleshooting Error messages Error message Resolution This version of the application does not support the target enclosure Specify a supported enclosure type. Invalid bay number x for an enclosure Specify a valid bay number. Unable to get enclosure part number Check connectivity with the OA, and then restart the update process. Another instance of this application is running.
Error message Resolution Unable to get enclosure VC mode information Log into VC Manager GUI and resolve any errors with VC Manager. Reset the OA to factory defaults, and then log into the VC Manager GUI. Initialization process failed. Firmware update cannot continue. Check update requirements, and then try the update again. File extraction failed Verify that the Virtual Connect firmware package is correct, or download it again from the HP website.
Technical support Before you contact HP Be sure to have the following information available before you call HP: • Technical support registration number (if applicable) • Product serial number • Product model name and number • Product identification number • Applicable error messages • Add-on boards or hardware • Third-party hardware or software • Operating system type and revision level HP contact information For the name of the nearest HP authorized reseller: • See the Contact HP worldwi
Acronyms and abbreviations CLI Command Line Interface DHCP Dynamic Host Configuration Protocol DNS domain name system FC Fibre Channel IP Internet Protocol OA Onboard Administrator SSH Secure Shell SSL Secure Sockets Layer TLS Transport Layer Security VCM Virtual Connect Manager VCSU Virtual Connect Support Utility Acronyms and abbreviations 18
