Manual
Table Of Contents
- HP Virtual Connect for c-Class BladeSystemVersion 3.01User Guide
- Notice
- Contents
- Introduction
- Overview
- HP Virtual Connect Manager
- Domain management
- Domain overview
- Firmware updates
- Domain Settings (Domain Configuration) screen
- Domain Settings (Domain IP Address) screen
- Domain Settings (Domain Enclosures) screen
- Domain Settings (Backup/Restore) screen
- Domain Settings (Local Users) screen
- Directory Settings (Directory Server) screen
- Directory Settings (Directory Groups) screen
- Directory Settings (Directory Certificate) screen
- Test LDAP authentication
- SNMP overview
- System Log screen
- System Log Configuration
- Network management
- Networks overview
- Define Ethernet Network screen
- Edit Ethernet Network screen
- Ethernet Networks (External Connections) screen
- Ethernet Networks (Server Connections) screen
- Ethernet Settings (MAC Addresses) screen
- Ethernet Settings (Port Monitoring) screen
- Ethernet Settings (Advanced Settings) screen
- Stacking Links screen
- Shared uplink sets and VLAN tagging
- Define Shared Uplink Set screen
- Shared Uplink Sets (External Connections) screen
- Shared Uplink Sets (Associated Networks) screen
- Storage management
- Server management
- Certificate Administration
- Hardware information screens
- Enclosure Information screen
- Enclosure Status screen
- Interconnect Bays Status and Summary screen
- Causes for INCOMPATIBLE status
- Interconnect Bay Summary screen (Ethernet module)
- Interconnect Bay Summary screen (VC-FC Module)
- Module removal and replacement
- Interconnect Bay Overall Status icon definitions
- Interconnect Bay OA Reported Status icon definitions
- Interconnect Bay VC Status icon definitions
- Interconnect Bay OA Communication Status icon definitions
- Server Bays Summary screen
- Server Bay Status screen
- Acronyms and abbreviations
- Glossary
- Index
Domain management 43
The VC-FC module generates connUnitPortStatusChange traps based on changes to the connUnitPortStatus
element of the FA-MIB. The following table shows the mapping of connUnitPortStatusChange trap
severities to the VC Domain MIB's trap severity definitions.
connUnitPortStatus value Severity
unknown INFO
unused INFO
ready NORMAL
warning WARNING
failure CRITICAL
nonparticipating INFO
initializing INFO
bypass INFO
ols MAJOR
other INFO
VC Module MIB traps
The following table lists traps in the VC Module MIB.
Trap name Trap data Description
vcModRoleChange moduleRole The VCM role of the module has changed.
vcModInputUtilizationUp port identification
The input line utilization on a port has exceeded its
high-water mark for longer than 30 seconds. port is
the index of the affected port in
ifTable
.
vcModInputUtilizationDown port identification
The input line utilization on a port has dropped below
its low-water mark for longer than 30 seconds. port
is the index of the affected port in
ifTable
.
vcModOutputUtilizationUp port identification
The output line utilization on a port has exceeded its
high-water mark for longer than 30 seconds. port is
the index of the affected port in
ifTable
.
vcModOutputUtilizationDow
n
port identification
The output line utilization on a port has dropped
below its low-water mark for longer than 30 seconds.
port
is the index of the affected port in
ifTable
.
vcModInputErrorsUp port identification
ifInErrors
The input error count on a port has exceeded its high-
water mark for longer than the error averaging period.
port
is the index of the affected port in
ifTable
.
vcModInputErrorsDown port identification
ifInErrors
The input error count on a port has dropped below its
low-water mark for longer than the error averaging
period. port is the index of the affected port in
ifTable
.
vcModOutputErrorsUp port identification
ifOutErrors
The output error count on a port has exceeded its high-
water mark for longer than the threshold averaging
period. port is the index of the affected port in
ifTable
.
vcModOutputErrorsDown port identification
ifOutErrors
The output error count on a port has dropped below
its low-water mark for longer than 30 seconds. port
is the index of the affected port in
ifTable
.