Upgrade and Service Guide

Upgrading and Servicing Guide 35

4 With the handle (G) released (up), align the drawer with the chassis slot, slide the

drawer into the chassis, and then press the face of the drawer (F) to fully seat it into

the power and SATA data connectors at the back.

5 Press the handle (G) down to lock the latch (H).

6 Close the access door and the computer. See “Opening and Closing the Computer”

on page 1.

Adding Memory

Your computer comes with random access memory (RAM), which temporarily stores data

and instructions on your computer. The computer has one or more memory modules, but

you may be able to replace the existing memory module(s) with higher-capacity ones.

The motherboard contains sockets for DDR-type (double data rate) DIMMs (dual in-line

memory modules). The exact number of sockets and the type of DDR memory modules may

vary by computer model.

Memory DIMM

CAUTION: The computer may not recognize the drive if the drawer is not fully

seated.