user manual

226 Managing supplies ENWW

25 Pinch the release tab on the left roller and pull the roller off of

the rod. Remove the roller on the right side. Slide the blue

cover to the left, and then remove the bottom roller.

26 Grasp both sides of the new bottom roller and slide it onto the

rod until it clicks into place. Install the roller on the right side,

and then install the left roller. Slide the blue cover to the right.

27 Replace the media in the 2,000-sheet side input tray (tray 4),

making sure that the guides fit snugly against the media, and

then slide the tray toward the MFP. The two plastic hooks on

the tray lock into the pedestal.

28 If NEW TRANSFER KIT appears on the control-panel display,

touch Y

ES. The kit life-count is automatically reset.

29 If NEW TRANSFER KIT does not appear, press the M

ENU button

to open the menus. Scroll to CONFIGURE DEVICE, to RESETS,

and then to RESET SUPPLIES. Scroll to NEW TRANSFER KIT, and

then touch Y

ES to reset the count.

Note

If you select NO or do not make a selection, the MFP remains

offline until you replace the kit and select YES.

30 Place the used parts in the packaging from the new ones. For

recycling information, see the recycling guide that is included

with the new image transfer kit.