user manual

208 Using the embedded Web server ENWW
Information tab
The Information pages group consists of the following pages.
● Device Status. This page shows the MFP status and shows the life remaining in HP
supplies, with 0% representing that a supply is empty. The page also shows the type
and size of print media that is set for each tray. To change the default settings, click
Change Settings.
● Configuration page. This page shows the same information that appears on the MFP
Configuration page.
● Supplies Status. This page shows the life remaining in HP supplies, with 0%
representing that a supply is empty. This page also provides part numbers for
supplies. To order new supplies, click Order Supplies in the Other Links area on the
left side of the window. To visit any Web site, you must have Internet access.
● Event log. This page shows a list of all MFP events and errors.
● Usage page. This page shows a summary of the number of pages the MFP has
printed, grouped by size and type.
● Device information. This page also shows the MFP network name, address, and
model information. To change these entries, click Device Information on the Settings
tab.
● Control panel. Click this button to view the current status of the MFP control panel.
Settings tab
Use the settings tab allows you to configure the MFP from your computer. The Settings
tab can be password protected. If this MFP is networked, always consult with the network
administrator before changing settings on this tab.
The Settings tab contains the following pages.
● Configure Device. Configure all MFP settings from this page. This page contains the
traditional menus that are used on MFPs that contain a control-panel display. These
menus include Information, Paper Handling, and Configure Device.
● Alerts. Network only. Set up to receive e-mail alerts for various MFP and supplies
events.
● Email. Network only. Used in conjunction with the Alerts page to set up incoming and
outgoing e-mail.
● Security. Set a password that must be typed to gain access to the Settings and
Networking tabs. Enable and disable certain features of the embedded Web server.
● Other Links. Add or customize a link to another Web site. This link is shown in the
Other Links area on all embedded Web server pages. These permanent links always
appear in the Other Links area: HP Instant Support™, Order Supplies, and
Product Support.
● Device Information. Name the MFP and assign an asset number to it. Type the name
and e-mail address for the primary contact who will receive information about the MFP.
● Language. Determine the language in which to show the embedded Web server
information.
● Time Services. Set the MFP to retrieve the date and time from a network server at
regular intervals.