user manual

SNMP configuration
The XP family of disk arrays and the SVS200 support standard Simple Net work Management Protocol
(SNMP) for remotely managing arrays. The SNMP agent on the service processor (SVP) performs
error-reporting operations requested by the SNMP manager. SNMP proper ties are usually set from the
SV P but they ca n also be set remotely using Command View (XP arrays only), Remote Web Console, or
Command View XP Advanced Edition. Refer to the applicable user’s guide for procedures.
RAID Manager command devices
RAID Manager manages Business Copy (BC) or Continuous Access (CA) operations from a host server.
To use RA
ID Manager you must d esignate at least one LDEV as a command device. This can be done
with Command View (XP arrays only), Remote Web Console , or Command View XP Advanced Edition.
Refer to the applicable user guide for information about how to designate a c ommand device.
HP StorageWorks Disk Array XP operating system configuration guide: Windows 2000/2003
11