user manual

C Command reference
Use this method to connect several products to a single PC. You can control several products at a time
by connecting them to a single PC. If the Set ID menu in Option is set to OFF, the monitor ID value
should be set between 1 and 99.
Connecting the cable
Connect the RS-232-C cable as shown in the following illustration. The RS-232-C protocol is used for
communication between the media player/computer and the display. You can turn the display on/off,
select an input source or adjust the OSD menu from the media player/computer.
RS-232C
(CONTROL)
OUT
IN
RS-232C
(CONTROL)
OUT
IN
RS-232C
(CONTROL)
OUT
IN
RS-232C
(CONTROL)
OUT
IN
1 2 3 4
RS-232-C configurations
7-Wire configurations
(Standard RS-232-C cable)
3-Wire configurations
(Not Standard)
media
player/
computer
Display media
player/
computer
Display
RXD 2
3TXD RXD2 3TXD
TXD 3
2RXD TXD3 2RXD
GND 5
5GND GND5 5GND
DTR 4
6DSR DTR4 6DSR
DSR 6
4DTR DSR6 4DTR
RTS 7
8CTS RTS7 7CTS
CTS 8
7RTS CTS8 8RTS
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
56 Appendix C Command reference ENWW