user manual

Table 3-29 Jetdirect Menu (continued)
First level Second level Third level Fourth level Fifth level Values Description
Ping Test Dest Type IPv4
IPv6
This test is used to
check network
communications.
This test sends
link-level packets
to a remote
network host, then
waits for an
appropriate
response. To run
a ping test, set the
following items:
Dest Type
Specify whether
the target product
is an IPv4 or IPv6
node.
Dest IPv4 Range: 0 – 255
Default =
127.0.0.1
Type the IPv4
address.
Dest IPv6 Select from a
provided list.
Default = : : 1
Type the IPv6
address.
Packet Size Default = 64 Specify the size of
each packet, in
bytes, to be sent
to the remote host.
The minimum is
64 (default) and
the maximum is
2048.
Timeout Default = 001 Specify the length
of time, in
seconds, to wait
for a response
from the remote
host. The default
is 1 and the
maximum is 100.
ENWW
Tools for troubleshooting
377