user manual

5. Remove one screw (callout 1). Push the cover (callout 2) toward the product, and then lift the cover
to remove.
Figure 2-51 Remove the right door assembly (5 of 8)
1
2
6. Disconnect two connectors (callout 1), and then release the wire harness from the guide
(callout 2).
TIP: It is easier to disconnect the lower connector if you first remove the wire harnesses from the
guide.
Figure 2-52 Remove the right door assembly (6 of 8)
1
2
ENWW
Covers
107