user manual

b. Hold the delivery assembly with the diverter (callout 1) in the depressed position to move the
sensor flag (callout 2) away from the sensor. Release one tab (callout 3).
Figure 2-122 Reinstall the delivery assembly (3 of 4)
2
3
1
c. Slide the sensor up toward the top of the delivery assembly to release two hooks (callout 1),
and then carefully remove the sensor from the assembly.
CAUTION: Do not damage the sensor holder or sensor flag when removing the sensor from
the delivery assembly.
Figure 2-123 Reinstall the delivery assembly (4 of 4)
1
150 Chapter 2 Removal and replacement ENWW