user manual

Operating the Monitor
4-6 User’s Guide
Management
(continued)
Power-On Status
Display
Displays the operating status of the monitor each time the
monitor is powered on. Select the location at which to display
the status:
Top
Middle
Bottom
Off
The factory default is Top or Off, depending on the model.
DDC/CI Support Allows the computer to control some OSD menu features such
as Brightness, Contrast, and Color Temperature. Select:
On
Off
The factory default is On.
Bezel Power LED Turns the light (LED) in the Power button on and off. When set
to off, the light will remain off at all times.
Sleep Timer Provides the timer-adjustment menu options:
Set Current Time — Sets the current time in hours and minutes.
Set Sleep Time — Sets the time you want to place the monitor
in sleep mode.
Set On Time — Sets the time you want the monitor to wake up
from sleep mode.
Timer — Sets the Sleep Timer feature on or off; the default
setting is Off.
Sleep Now — Immediately sets the monitor to enter
sleep mode.
Information Selects and displays important information about the monitor.
Current Settings Provides the current input video mode.
Recommended Settings Provides the recommended resolution mode and refresh rate
for the monitor.
Serial Number Reports the serial number of the monitor. The serial number is
needed if contacting HP technical support.
Version Reports the firmware version of the monitor.
Backlight Hours Reports the total hours of backlight operation.
Service Support For service support, go to: http://www.hp.com/support
Factory Reset Returns settings to factory defaults.
Icon
Main Menu
Options
Sub-menu Options Description (continued)