user manual

Setting Up the Monitor
3-8 User’s Guide
Connecting the Power Cable
1. Read the warning below.
Connecting the power cable
2. Connect one end of the power cable to the monitor and the other end to a grounded electrical outlet.
WARNING: To reduce the risk of electric shock or damage to your equipment:
■ Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the
power cord into a grounded (earthed) electrical outlet.
■ Be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and
located as close to the equipment as possible. A power cord should be routed so that it is not likely to be
walked on or pinched by items that are placed upon it or against it.
■ Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip
over them. Do not pull on a cord or cable.
See “Technical Specifications” (Appendix B) for additional information.
WARNING: To prevent injury from electrical shock, you should do one of the following if a properly grounded
electrical outlet is not available: (1) You should use an electrical outlet adapter that provides proper grounding.
(2) You should have a properly grounded electrical outlet installed.