user manual

Automatic Calibration

Data Explorer

™

Software User’s Guide 5-29

5.4.2 Importing and Specifying

Automatic Calibration Settings

Importing

Hint: Importing automatic calibration settings is useful

when you calibrate batches of related samples.

Automatic calibration settings are saved as part of processing

settings in a .DAT file. To use auto calibration settings from

another .DAT file:

1. Open the data file containing the desired auto

calibration settings files.

2. Save the .SET information from this file by selecting

Settings from the File menu, then selecting Save

Processing Settings As. For more information, see

Section 1.6.5, Extracting and Saving Information from

.DAT, .RSD, and .RCD Files.

3. Open or activate the new file.

4. Copy the settings to the new file by selecting Settings

from the File menu, then selecting Restore Processing

Settings. For more information, see Section 1.4.2,

Customizing Processing and Graphic Settings (.SET).

NOTE: All processing settings, not just calibration

settings, are applied to the new file.

Specifying To specify automatic calibration settings:

1. Click the Spectrum window to activate it, then select

the spectrum of interest.