QuickSpecs HP ProLiant DL160 Generation 5 (G5) Overview Hot Plug SAS/SATA and Non-Hot Plug SATA Models Front View: 1. Access panel 2. Quad-Core Intel® Xeon® 5400 series processors (supports up to two) 3. Eight PC2-5300 (DDR2-667) fully buffered DIMM memory slots 4. Power supply (650 Watts) 5. 6. 7. 8. System fans Optional CD-RW or DVD-ROM drive Two USB ports Power on/off & system LEDs 9. Optional 3rd and 4th 3.5” Non-Hot plug SATA or hot plug SAS/SATA hard drive bays Standard 1st and 2nd 3.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Overview that provide customers with a platform to design a fully optimized solution. It is ideal for general purpose and high performance computing.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Overview Rack (1U) Fixed mounting rails included with all models Deployment/Serviceability: Deployment/Serviceability Tool-less access to all system components for easy in rack serviceability Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement Warranty: Warranty This product is covered by a global limited warranty and supported by HP Servic
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB) Processor One of the following Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB) depending on Model NOTE: Available through Configure To Order only.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Standard Features Expansion Slots # 1 1 2 2 Technology Bus Width PCI-Express 2.0 PCI-X*** x16 Connector Width* Width x16 64-bit N/A Bus Number* Form Factor Number Device No.** No 1 0 5 1 Full length, full height Full length, full height Low Profile Notes 3.3 volts 3.3 volts PCI-Express x16 x16 6 3 3.3 volts 2.0 PCI-X*** 64-bit N/A 5 1 Low Profile 3.3 volts NOTE: All slots can accept universal keyed PCI cards * Default bus assignment.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Standard Features Interfaces Parallel Network RJ-45(Ethernet) Serial Pointing Device (Mouse) Graphics Keyboard USB None 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i Remote Management) 1 1 1 1 5 (two front, one internal, two rear) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Standard Features Core Infrastructure Management HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Standard Features Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21).
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Standard Features Rack Airflow Requirements Rack 10000 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Standard Features Service and Support HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs. HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL160 G5 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Models Non-Hot Plug Serial ATA (SATA) Models HP DL160 G5 X5472 Non-Hot Plug SATA, 2GB, (1P) 445198-xx1 HP DL160 G5 E5430 Non-Hot Plug SATA, 1GB, (1P) 445197-xx1 HP DL160 G5 E5405 Non-Hot Plug SATA, 1GB, (1P) 445196-xx1 Processor(s) One of the following depending on model Cache Memory Memory One of the following depending on model Network Controller Storage Controller Hard Drive Internal Storage Optical Drive Form Factor (1) Quad-Core Intel® Xeon® processo
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Models Country Code Key xx = 00 xx = 20 xx = 29 xx = 37 xx = 42 xx = AA U.S.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. NOTE: HP does not allow factory integration of options into standard models listed above.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Configuration Information - Factory Integrated Models Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) Processors Memory Quad-Core Processors Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB), FIO NOTE: If 2 processors are desired, select one 462465-L21 and one 462465-B21. Quad-Core Intel® Xeon® processor X5460 (3.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Configuration Information - Factory Integrated Models Hard Drive SATA Non-Hot Plug Midline (MDL) Drives NOTE: A minimum of one hard drive required when purchasing Non-Hot Plug CTO Chassis Model (P/N 445192-B21). NOTE: SATA Non-Hot Plug Hard Drives to be used with Non-Hot Plug CTO Chassis Models Only). HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD HP 250GB 3G SATA 7.2K NHP 3.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Configuration Information - Factory Integrated Models Storage Controllers Power Supply NOTE: A minimum of one SAS Controller is required when purchasing Hot Plug CTO Chassis Model (P/N 445193-B21). HP SC44Ge Host Bus Adapter HP SC40Ge 4 Internal PCIe SAS RAID Half Height HBA, FIO NOTE: Recommended HBA when purchasing Hot Plug CTO Chassis Model (P/N 445193-B21).
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options Server Management Stand Alone Software Product and ProLiant Essentials NOTE: Electronic licensing options are available for Insight Control suites and select ProLiant Essentials software products. Please see the appropriate Insight Control and ProLiant Essentials QuickSpecs for additional information.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options Processor Memory Hard Drives Quad-Core Processors Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB) Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB) Option Kit Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB) Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz Front Side Bus) Quad-Core Intel® Xeon® processor E5472 (3.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options SATA Hot Plug Midline (MDL) Drives (SAS/SATA Hot Plug Models Only) NOTE: A SAS HBA or Array Controller is required. HP 1TB 3G SATA 7.2K 3.5" MDL HDD HP 750GB 3G SATA 7.2K 3.5" MDL HDD HP 500GB 3G SATA 7.2K 3.5" MDL HDD HP 250GB 3G SATA 7.2K 3.5" MDL HDD NOTE: Server BIOS update is required to support 3G SATA drives when configured with embedded SATA controller. SATA Hot Plug Entry (ETY) Drives HP 160GB 3G SATA 7.2K 3.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options Hot Plug HDD Backplane Hot Plug HDD Backplane 1U 2S Kit Option NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options HP Smart Array P400/256 Controller NOTE: Customers can only order one Smart Array P400/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL160 G5 server based on battery space. HP Smart Array P400/512 Controller with BBWC NOTE: Customers can only order one Smart Array P400/512MB BBWC Controllers for the HP ProLiant DL160 G5 server based on battery space.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options HPC Specific Options HP IB 4X DDR PCI-e Dual Port 0 Memory HCA HP IB 4X DDR Conn-X PCI-e G2 Dual Port HCA HP IB 4X DDR PCI-e DUAL PORT HCA NOTE: For HPC interconnect adapters please see the HPC Interconnect section of this QuickSpecs. Tape Drives NOTE: For the complete listing of Tape Drive offerings, please see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options HP StorageWorks 1U USB Rack-Mount Kit NOTE: The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 tape drives. HP StorageWorks 1U SAS Rack-Mount Kit NOTE: The 1U SAS Rack-Mount Kit can support up to (2) half-height tape drives and is compatible with the LTO-2 Ultrium 448 SAS, LTO-3 Ultrium 920 SAS and LTO-4 Ultrium 1760 SAS tape drive.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options Tape Autoloaders Tape Libraries HP StorageWorks DAT Autoloader HP StorageWorks DAT 72x10 tape autoloader HP StorageWorks 1/8 G2 Tape Autoloader HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader HP StorageWorks 1/8G2 LTO-4 Ultrium 1760 SCSI Tape Autoloader HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 Tape Autoloader HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader HP StorageWorks 1/8 G2 LTO-2 Ultrium 448 Tape Autoloader HP StorageWorks
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options HP StorageWorks Modular Smart Array 50 HP StorageWorks Modular Smart Array 50 Enclosure NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module, redundant hot plug power supplies and hot plug fans. NOTE: Please see the Modular Smart Array 50 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/12245_div/12245_div.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options Uninterruptible Power Systems - Rack HP, R1.5kVA UPS, 1U, JPN/TW HP R1.5 VA 1U UPS NA HP R1.5 VA 1U UPS INTL HP R/T2200 2-U ERM USB Options HP 1GB USB 2.0 Floppy Drive Key HP 256MB USB 2.0 Floppy Drive Key USB 1.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Options Service and Support Offerings (HP Care Pack Services) Hardware Services 4-Hour On-site Service 13-Hour x 5-Day Coverage, 3 Years, Electronic 24-Hour x 7 Day Coverage, 3 Years, Electronic Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years, Electronic Hardware Services 6-Hour Call to Repair On-Site Service Hardware Installation, Electronic NOTE: For more information, customer/resellers can contact: http://www.hp.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Memory HP ProLiant DL160 G5 (all models) NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory 1GB (2x512MB) or 2GB (2 x 1GB) depending on model, PC2-5300 Fully Buffered DIMM memory, with Advanced ECC. Maximum Memory Up to 32GB memory is available with the optional installation of PC2-5300 Fully Buffered DIMM memory kits. NOTE: Memory should be installed in pairs and matched for optimum performance.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Storage 1-4 A Four Non-hot plug SATA or four 3.5" Hot-plug SAS/SATA hard drive bays Optional DVD-ROM, or DVD/CD RW Drive Support Removable Media DVD-ROM DVD/CD RW Quantity Supported Up to 1 Up to 1 Position Supported A A Hard Drives SATA Non-Hot Plug Midline (MDL) Drives 3.5" Position Quantity Supported Supported 250GB 1.5G SATA 7.2K Up to 4 1-4 500GB 1.5G SATA 7.2K 750GB 1.5G SATA 7.2K SATA Non-Hot Plug Enterprise (ENT) Drives 3.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Storage 1TB 3G 15K 750 3G 15K Up to 4 1-4 Embedded SATA with integrated SATA RAID 0,1 HP Smart Array E200/128 BBWC Controller HP Smart Array P400 Controller HP Smart Array E500/256MB Controller HP Smart Array P800 Controller SAS Hot Plug Enterprise (ENT) Drives 3.5" NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Storage Tape and Disk-Based Backup NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/division/10233.html (Worldwide) NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed below, please see the following: http://h18000.www1.hp.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Storage Tape Automation, External DAT 72x10 Autoloader 1/8 G2 Autoloader MSL2024 MSL4048 HP U320e SCSI Host Bus Adapter NOTE: Recommended for MSL tape libraries. HP SC44Ge Host Bus Adapter AH627A HP StorageWorks SAS Tape Automation, External 1/8 G2 Autoloader MSL2024 MSL4048 External 416096-B21 HP StorageWorks Fibre Tape Automation, External MSL2024 MSL4048 MSL8096 MSL6000 External Please consult the EBS connectivity matrix at: http://www.hp.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Power Specifications Operational Input Voltage Range (Vrms) Frequency Range (Nominal) (Hz) Nominal Input Voltage (Vrms) Max Rated Output Wattage Rating Nominal Input Current (A rms) Max Rated Input Wattage Rating (Watts) Max. Rated VA (Volt-Amp) Efficiency (%) Power Factor Leakage Current (mA) Maximum Inrush Current (A peak) Maximum Inrush Current Duration (mS) 90Vac to 264Vac full range 47 Hz to 63 Hz 100 115 200 220 230 240 653.10 653.19 653.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) System Specifications Power ProLiant DL160 G5 Fully Configured Fully Loaded System Input Wattage (W) Fully Loaded System Input Current (A rms) Fully Loaded System Thermal (BTU- Hr) Fully Loaded System VA (Volt-Amp) System Leakage with all power supplies loaded (mA) System Inrush Current with all power supplies loaded (A) 115V/60Hz 651 5.7 2218 657 1.58 220V/50Hz 638 3.0 2174 657 3.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Technical Specifications System Unit Dimensions (H x W x D) (with bezel) Weight (approximate) Input Requirements (per power supply) Power Specifications 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm) Maximum (all hard drives, power supplies, and processors installed) Minimum (one hard drive, power supply, and processor installed) Rated Line Voltage 37.00 lb (16.78 kg) 30.00 lb (13.69 kg) 90 to 140 VAC 180 to 264 VAC Rated Input Current 7.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Technical Specifications Non-operating Acoustic Noise 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min). Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment.
QuickSpecs HP ProLiant DL160 Generation 5 (G5) Technical Specifications Embedded NC105i PCIe Network Interface Gigabit Server Adapter Data Transfer Method Network Transfer Rate Connector Cable Support Environment-friendly Products and Approach End-of-life Management and Recycling Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
