Users Manual

27
 Basic Operations：
As shown in the diagram, place the MEAZOR in
the middle of the room. Align the laser beam with
point 1 and tap on it to record the first reference
point, turn and aligns it with point 2 and take
record, rotate and aligns it with point 3,4,5 and
take record. After completing the above steps, all
the reference points of the room are captured.
After taping on Save , the data will be sent
to the MEAZOR APP.
 Tilt mode ：
As shown in the diagram, an obstacle is placed on
the line towards a reference point. In this case, Tilt
Mode could be used to complete scanning.
Tilt Mode Off: The user is unable to capture
reference point 2, with Tilt Mode Off, and can only
infer the approximate position of point 2.