User Guide

7
Insist that Hoyt string and cables be used on your
bow. Some Hoyt bow models come equipped with
the FUSE Custom String System. In those cases,
always replace your strings with FUSE brand strings.
Beware of lesser quality string and cables as they may
alter the performance of your bow or cause damage to
it.
ECCENTRIC LUBRICATION
Cam & 1/2 System bows feature sealed ball bearings
which do not require lubrication.
For conventional bearings or bushings, a light spot
lubrication of the axles where they pass through the
eccentric should be done on a regular basis (1,500 -
2,000 shots). In adverse hunting conditions where
dirt, dust or moisture are encountered, lubrication
may be done on a daily basis. Hoyt recommends you
use a silicone or Teflon based lubrication or any other
quality grease available at your local Hoyt Pro Shop.
It is not recommended that you use “Penetrating Oils”
such as WD-40, EZ-#7, Fast Break, etc.
BOW PRESS USE
Never allow your bow to be put into a bow press
unless it is operated by a knowledgeable bow techni-
cian. Hoyt recommends that all necessary adjust-
ments requiring the use of a bow press be done by an
authorized Hoyt pro shop.