User Guide

weight and may reduce the performance of the
wheels on your bow. Hoyt recommends staying
within the optimum performance range shown in
Figure 19. If your draw length requires a cam posi-
tion well outside the range shown in Figure 20, you
may consider changing to a smaller or larger cam as
needed. Please consult your local authorized Hoyt
dealer. Start by setting the bottom wheel position as
shown in Figure 19. Next, approximately match the
distance on the top and bottom wheels between the
bowstring and the point of the wheels as shown in
Figure 20. (You may need to change the control cable
length to optimize the top wheel position.) Exact
measurements are not necessary since the Wheel &
1/2 system is not sensitive to timing and synchro-
nization.
fig 20
TOP
WHEEL
Bowstring
Buss
Cable
Yoke
Control Cable
Top Performance
Reference
This distance
should be similar on
both the top and
bottom wheels.
22