User Guide

Zephyr Cam & 1⁄2

Hoyt's Zephyr Cam & 1⁄2 is a high performance draw

length specific cam system. Cams are available in 1⁄2

inch draw-length increments. Zephyr cams are also

available in either 65% or 80% ATA let-off. Both top

and bottom cams must be swapped out to change the

bow's let-off.

Adjustable Valley Technology (AVT)

The Zephyr Cam & 1⁄2 features AVT, which allows the

shooter to customize how the cam feels at full draw.

An optional draw stop peg is included. Without the

peg the back wall is softest and the cam will have the

longest valley. With the draw stop installed in the fur-

thest outboard position the cam will feature a long val-

ley and a hard wall. In the inboard peg position the

cam has a hard wall and a shorter valley. The draw

length and let-off are essentially the same with or

without the AVT draw-stop peg installed. (See fig 15)

CABLE

SIDE

Limb

Control

Cable

Buss Cable

Bowstring

StringShox

Stealth Draw

Dampener

Inboard

Peg Position

Outboard

Peg Position

fig 15