User Guide

12
back without proper installa-
tion of cable guard bar and
glide.
TILLER ADJUSTMENT
Tiller is the difference in dis-
tance between the upper limb
to the string and lower limb to
the string measured from the
base of the limbs (where the
limb and riser meet) at a 90 degree angle to the
string. (See fig 6)
The main function of
tiller is to allow the
a r cher to more easily and
comfortably aim during
the draw and release of
the shot. Most bows will
shoot best near even tiller
which means the dis-
tance from the string to
the limb is the same on
top and bottom. Ti l l e r
adjustments are made by
adjusting either limb
weight adjustment bolt.
(See draw weight adjust-
ment section pg. 14)
fig 6
Control
Cable
Buss
Cable
fig. 7
Tiller
Tiller