User Guide

NOCK SET INSTALLATION

A nock point is a reference on the string that

marks the exact location for you to nock your

arrow. The arrow’s nock is positioned under the

nock set. To install the nock set at the proper

position begin by slipping the nock set on the

string. Then, using your rest as a reference, posi-

tion the nock set just above level. A finger shoot-

er should initially position the nock set at

approximately 3/16” above level. The release

shooter should position the nock set so that the

arrow sits at a 90 degree angle with the string

and adjust height as needed. (See fig 4) Once the

nock set is at the desired location use a special set

of nocking pliers to crimp the nock set into place.

NEVER shoot a bow without a nock set or with a

nock set that has not been properly crimped. For

proper installation Hoyt recommends that this be

done by a qualified pro shop.

Nocking Point

Height

fig 4