User Guide

Insist that Hoyt USA string and cables be used on

your bow. Beware of lesser quality string and cables

as they may alter the performance of your bow or

cause damage to it.

ECCENTRIC LUBRICATION

For conventional bearings or bushings, a light spot

lubrication of the axles where they pass through the

eccentric should be done on a regular basis (1,500 -

2,000 shots). In adverse hunting conditions where

dirt, dust or moisture are encountered, lubrication

may be done on a daily basis. Hoyt USA recommends

you use a silicone or Teflon based lubrication or any

other quality grease available at your local Hoyt USA

Pro Shop. It is not recommended that you use

“Penetrating Oils” such as WD-40, EZ-#7, Fast Break,

etc.

Note: Cam & 1/2 System bows feature sealed stain-

less steel ball bearings which do not require lubrica-

tion.

BOW PRESS USE

Never allow your bow to be put into a bow press

unless it is operated by a knowledgeable bow techni-

cian. Hoyt USA recommends that all necessary

adjustments requiring the use of a bow press be done

by an authorized Hoyt pro shop.