User Guide

Each Hoyt Spiral Cam & 1/2 System bow was

shipped in the 65% let-off (draw stop peg position

#1). Note: changing the draw-stop position to

manipulate let-off will alter draw length by approx-

imately 1/8” for each draw-stop hole; draw length

will be shortened when changing to a lower let-off

position and lengthened in higher let-off positions.

LOCATING YOUR BOW’S SERIAL NUMBER

The serial num-

ber on all alu-

minum Hoyt

USA compound

bows is located

on the riser

between the

limbs under the

bottom pocket.

(See fig 18) To

find the serial

number on mag-

nesium bows,

look at the rest

mount surface.

(See fig 19) If

you have

already attached

a rest to your

riser, you may

have to remove

it to see the seri-

al number.

01234

0123456

fig 18

fig 19

Serial

Number

Serial

Number

ALUMINUM BOW

MAGNESIUM BOW