User Guide

draw. Each let-
tered position will
provide approxi-
mately l/2 inch
longer/shorter
draw than the
previous setting.
Once the inner-
cam is in the
desired location,
reinstall and
tighten the draw
length screw first
and then the fastening screw.
BOTTOM CAM: Remove the draw length screw,
rotate module to the same letter
ed position as the top
module, and replace. (see fig 13) Note: You must
make the same adjustments to the top and the bot-
tom inner-cams or the bow will not tune properly.
WARNING:
Never
remove the
stainless
steel con-
trol cable
peg unless
the string is
relaxed in a
bow press.
16
fig 12
fig 13
TOP CAM
BOTTOM CAM
Module Positioning
Indicator
Draw
Length
Screw
Fastening
Screw
Draw
Length
Screw
Module Positioning
Indicator
Control
Cable
Peg