User Guide

COMPOUND BOW ADJUSTMENT

DRAW WEIGHT ADJUSTMENT

Weight adjustments can easily be made by turning the

weight adjustment bolt clockwise to increase weight

or counter clockwise to decrease weight. Note: Always

turn the top and bottom adjustment bolts in equal

amounts. Some Hoyt USA model bows are equipped

with a Dual Locking Pocket System. Before draw

weight adjustments are made on

these models you must first

loosen the pocket locking screws

located on both sides of the

pocket. (See fig 11) When

adjustments are completed, re-

tighten the pocket locking

screws.

DRAW LENGTH ADJUSTMENT (INNER-CAM

ADJUSTABLE MODULES)

Many Hoyt bows utilize the inner-cam adjustable

module for draw length adjustment. The inner-cam

can generally be adjusted without the aid of a bow

press.

CAM & 1/2 DRAW LENGTH ADJUSTMENT

TOP CAM: To adjust the draw length on Hoyt’s Cam

& 1/2 (inner-cam) model bows, use a standard allen

key to loosen the fastening screw and to remove the

draw length screw. (see fig 12) Rotating the inner-cam

in the (+) direction will lengthen the draw. Rotating

the inner-cam in the (-) direction will

shorten the

Pocket Locking Screw

fig 11