User Guide

11
of nocking pliers to crimp the nock set into place.
NEVER shoot a bow without a nock set or with a
nock set that has not been properly crimped. For
proper installation Hoyt USA recommends that
this be done by a qualified pro shop.
CABLE GUARD INSTALLATION
All Hoyt USA bows are designed with a built in
cable guard bar attachment. Before mounting the
cable guard bar, you must remove the rubber-
bands used only for shipping purposes. To insert
the cable guard bar, simply slide the bar through
the two mounting holes on the riser making sure
that the bar is pushed completely through and
flush with the end of the front mounting hole.
Screws
Flush w/Front of Riser
fig 6
Nocking Point
Height
fig 5