User Guide

17
approximately
l/2” longer/
shorter draw
than the previous
setting. Once the
inner-cam is in
the desired loca-
tion, reinstall and
tighten the draw
length screw first
and then the fas-
tening screw.
BOTTOM
CAM: Remove
the draw length
screw, rotate
module to the
same letter
ed
position as the
top module,
and replace.
(see fig 14).
Note: You must
make the same
adjustments to
the top and the bottom inner-cams or the bow cannot
be properly tuned.
WARNING: Never remove the stainless steel control
cable peg unless the string is relaxed in a bow press.
fig 13
Fastening
Screw
Module Positioning Indicator
Performance
Marks
Draw
Length
Screw
Performance
Marks
fig 14
Draw
Length
Screw
Module Positioning
Indicator
Stealth
Draw Dampener
Control
Cable
Peg