User Guide

COMPOUND BOW ADJUSTMENT

DRAW WEIGHT ADJUSTMENT

Weight adjustments can easily be made by turning the

weight adjustment bolt clockwise to increase weight

or counter clockwise to decrease weight. Note: Always

turn the top and bottom adjust-

ment bolts in equal amounts.

Some Hoyt USAmodel bows are

equipped with a Dual Locking

Pocket System. Before draw

weight adjustments are made on

these models you must first

loosen the Pocket Locking screws located on both sides

of the pocket. (See fig 12) When adjustments are com-

pleted, re-tighten the Pocket Locking screws.

DRAW LENGTH ADJUSTMENT (INNER-CAM

ADJUSTABLE MODULES)

Many Hoyt bows utilize the patented inner-cam

adjustable module for draw length adjustment. The

inner-cam can generally be adjusted without the aid

of a bow press.

CAM & 1/2 DRAW LENGTH ADJUSTMENT

TOP CAM: To adjust the draw length on Hoyt’s

patented Cam & 1/2 (inner-cam) model bows, use a

standard allen key to loosen the fastening screw and

to remove the draw length screw. (see fig 13) Rotating

the inner-cam in the (+) direction will lengthen the

draw. Rotating the inner-cam in the (-) direction will

shorten the draw. Each lettered position will provide

Pocket Locking Screw

fig 12