Open Energy for All Hybrid Inverter Quick Installation Guide HYT-5.0HV-EUG1 HYT-6.0HV-EUG1 HYT-8.0HV-EUG1 HYT-10.0HV-EUG1 HYT-12.0HV-EUG1 Region: Global REV1.1 hoymiles.
Hybrid Inverter Quick Installation Guide 1 General Declaration • The information in this quick installation guide is subject to change due to product updates or other reasons. • This guide cannot replace the product labels or the safety precautions in the user manual unless otherwise specified. All descriptions here are for guidance only. • Before installations, read through the quick installation guide and the user manual to learn about the product and the precautions.
Hybrid Inverter Quick Installation Guide 3 Mounting the Inverter ≥300mm ≥200mm ≥200mm ≥300mm ≥15° ≥500mm 1 75mm 2 75mm 3 65mm 4 5 © 2022 Hoymiles Power Electronics Inc. All rights reserved.
Please follow local wiring regulations. Distribution Box ② ⑥ L1 L1 L2 PV L3 N EPS HYT-HV Series L2 N PE or BMS RCD L3 Do not connect this terminal when the neutral wire and PE wire are connected together.
① ② ③ HYT-5.0HV-EUG1 25A/600V DC Breaker 16A/230V AC Breaker 20A/230V AC Breaker HYT-6.0HV-EUG1 25A/600V DC Breaker 16A/230V AC Breaker 25A/230V AC Breaker HYT-8.0HV-EUG1 40A/600V DC Breaker 20A/230V AC Breaker 32A/230V AC Breaker HYT-10.0HV-EUG1 40A/600V DC Breaker 25A/230V AC Breaker 32A/230V AC Breaker HYT-12.
Distribution Box ② ⑥ L1 L1 L2 PV RCD L2 L3 L3 N N PEor PE Backup Loads EPS BMS HYT-HV Series Meter ① Battery Smart Meter ③ LOAD GRID ⑤ L1 CT1 L2 CT2 L3 CT3 L1 Utility meter L2 L3 N N PE PE GRID ④ E-BAR ⑦ RCD L1 L2 L3 N PE Normal Loads Grid Hybrid Inverter Quick Installation Guide 05 Wiring diagram for other countries, please follow local wiring regulations.
① ② ③ HYT-5.0HV-EUG1 25A/600V DC Breaker 16A/230V AC Breaker 20A/230V AC Breaker HYT-6.0HV-EUG1 25A/600V DC Breaker 16A/230V AC Breaker 25A/230V AC Breaker HYT-8.0HV-EUG1 40A/600V DC Breaker 20A/230V AC Breaker 32A/230V AC Breaker HYT-10.0HV-EUG1 40A/600V DC Breaker 25A/230V AC Breaker 32A/230V AC Breaker HYT-12.
Hybrid Inverter Quick Installation Guide 5 Electrical Connection Step 1 Grounding Protection Wire 1 S 2 H L L=H+(2-3)mm S≥4mm² M4 1.2 N·m Step 2 Grid (Same wirings for GEN connector, leave it alone if not used) 1 2 7-8mm 20-25mm 13mm≤ 3 4 ≤18mm 5 2 3 4 1 S=4mm² M4 1.2 N·m 4 2 4 5 3 5 1 N PE Click 1 3 2 Step 3 EPS 1 2 13mm≤ ≤18mm 3 4 5 1 3 5 2 1 4 6 1 N PE L 07 4 1 4mm²≤S≤6mm² M4 1.
Hybrid Inverter Quick Installation Guide Step 4 PV 1 2 3 PV+ 1 PV- 2 Φ 3 S 4 3 2 1 4 7-8mm Φ:4-5mm PV+ PV- 2.5mm²≤S≤4mm² Click Step 5 Battery 1 2 1 3 BAT+ BAT- 2 Φ 7-8mm S 3 3 4 2 Φ :4-6mm 4 1 BAT+ BAT- S=4mm² Click © 2022 Hoymiles Power Electronics Inc. All rights reserved.
Hybrid Inverter Quick Installation Guide Step 6 Signal Communication (Connection of communication box is mandatory) DI DRM 2 IN- 4 6 8 D2/6 D4/8 REF 1 IN+ 3 5 7 D1/5 D3/7 COM Meter 09 8-NC 7-NC 6-NC 5-485B 4-485A 3-NC 2-NC 1-NC BMS Para1 8-485B 7-485A 6-NC 5-CANL 4-CANH 3-NC 2-NC 1-NC Para2 8-485A_2 7-485B_2 6-485A_1 5-485B_1 4-CANL 3-CANH 2-DI IN1-DI IN+ 8-485A_2 7-485B_2 6-485A_1 5-485B_1 4-CANL 3-CANH 2-DI IN1-DI IN+ 120 Ohm ON OFF DO1 1 2 NO1 COM1 DO2 1 2 NO2 COM2 Lab
Hybrid Inverter Quick Installation Guide RJ45 Terminal Connection (METER, BMS) 1 2 3 3 2 1 4 5 6 3 2 1 M3 0.6-0.8 N·m 40mm 6-7 N·m Step 7 Data Transfer Stick (DTS) 1 3 2 1 2 4 M3 0.6-0.8 N·m © 2022 Hoymiles Power Electronics Inc. All rights reserved.
Hybrid Inverter Quick Installation Guide Step 7 Data Transfer Stick (DTS) 3 2 1 1 2 M3 0.6-0.8 N·m 4 1 11 5 2 3 6 5 4 2 3 1 1 8-NC 7-NC 6-RX- PARA1 2 1 0.8-1.5 N·m 2 0.5-0.
Hybrid Inverter Quick Installation Guide 6 DTS Online Setting 1. Search “Hoymiles” in the App Store (iOS) or the Play Store (Android), or scan the QR code to download the Hoymiles Installer App. 2. Open the app and log in with your installer account and password. For new Hoymiles installers, please apply for an installer account from your distributor in advance. 3. Use the App to connect to the DTS. (a) Open the Installer App on smartphone/tablet and log in.
Hybrid Inverter Quick Installation Guide (b) Select the DTS’s wireless network and click Connect.
Hybrid Inverter Quick Installation Guide 4. Network configuration. (a) Upon successful connection, click on "Network Configuration" again and access the Network Configuration page. (b) Select the router Wi-Fi and enter the password. (c) Click on “Send to DTU”. 2 1 5. Check the DTS indicator for a solid blue light, which signifies a successful connection. The network configuration takes about 1 minute, please be patient. If the network is not connected, please check the internet as instructed.
User Manual in the QR code or at www.hoymiles.com/resources/download/ Hoymiles Power Electronics Inc. Add: No.18 Kangjing Road, Hangzhou 310015, P.R. China Tel: +86 571 2805 6101 Email: service@hoymiles.com support@hoymiles.com www.hoymiles.