User's Manual

It‟s used for setting the PTZ device when control a PTZ camera(Press the PTZ button on the remote,

then press + /- button).

Protocol type: Pelco-D/Pelco-P for option.

Address code: Set a different address code for each channel, the MDVR will recognize this address

and control it. Press number keys to enter.

Preset: Preset location when the system start-up. You can set the PTZ lots of the location first, and

then choose one of them as the preset location.

9.2.5.8. Fatigue Driving

For fatigue driving function, it‟s still under development.

9.2.6. System Info

The shortcut key is info key on the remote, press UP or DOWN key to switch the information interface. It

will show the whole information about the device status.