User's Manual

34
The acceleration alarm first need to get coordinate correction, the vehicle may be parked on level ground
to clear calibration.
Tilt: it refers to a device rollover angle, unit is degree.
Enable：Press【Enter】to select: ON/OFF.
Limit: Set a limited value for system judgement.Press the number keys to enter.
Wait : The waiting time in case of mistaken judgement . Press the number keys to enter.
Record: Turn on/off recording function.Press【Enter】to select: On / Off.
Alarm link: Press【Enter】to select: OFF / Output 1 / Output 2/Buzzer.
Delay:Linkage‟s duration time. Press number keys to set.
Adjust: After you install the device, press this button to refresh all parameters to zero.
9.2.5.4. Motion Detection
For saving the space of the disk, you can turn on the motion-detect function. It will record only when
camera has detected the movement objects or actions.
Besides, it also supports Occlusion alarm function. You can only choose one of them between Motion
detect and video Occlusion at the same time.