User's Manual

26
9.2.3.5. Storage setting
Alarm Previous Rec: Set the previous recording time before the alarm happens. Press number keys to
enter, 0 to 60 seconds for selection.
Alarm delay:Set the delay recording time after the alarm happened. Press number keys to enter, 0 to
3600 seconds for selection.
Alarm file to server: Alarm file save to CMS or FTP. All alarms file will be uploaded at real-time. So pay
attention if it‟s linked by 3G/4G, since it will cost data of SIM card.
CMS is default setting, it will be saved in the Storage Server of CMS.
FTP: It will upload to the FTP server of CMS or your own FTP server(need build it first).
Alarm file protection: Set the alarm file protection time, this files will be not deleted during the setting
days. Press number keys to enter, 0 to 45 days.
Protect Switch: Close or Open.When it‟s open, then you can set the Alarm file protection’s days(it
will not be covered in HDD/SD until that days). And select the alarm type , such as I/O ,G-sensor ,speed,
Fatigue ,voltage and so on.
Attention: In order to upload files to FTP or CMS storage server.
1. Must turn on the Protect Switch OPEN. And set the Alarm file protection days.
2. Set a Big space for StdPart (such as 2G/4G size) in 9.2.2.6 Format.
Disk and Usage: Press【Enter】to select: No / Record / mirror / Backup.
No: No recording; Record: Recording the file in this disk.
Mirror: Save the recording video in this disk at same time.
Backup: When the current recording disk is failed, the system will save the video in this disk.