User's Manual

23
Alarm: Only record when alarm is triggering, should set in the Alarm menu first.
Display Resolution: This is set the TFT screen dispaly resolution.Press【Enter】to select: 720 ×
576/1024 × 768/1280 × 720/1920*1080.
View mode: Press【Enter】to select: Two / Four / Six / nine
View Chn: Select the channels you need ,default setting is all channels.
9.2.3.2. Main stream
Enable: Press【Enter】to select: On / Off.
Res: Resolution ,press【Enter】to select: D1 / HD1 / CIF / 720P.
CIF:352*288,HD1:352*576, D1:704*576, 720P:1280*720 .
FPS: Frames per second , More frames, every picture will be more clear. press【Enter】to select: 1-25 .
NTSC : 30FPS , PAL: 25FPS.
QUA: Quality of the video, press【Enter】to select: 1-8. 1 is best , but it will cost more storage space.
AUDIO: Press【Enter】to select: On / Off. ON means the audio will be saved with video together.
Mirror/Flip: Set the image to mirror or flip .Press【Enter】to select the types.
QuickSet: Setup all channels resolution simultaneously, press【Enter】to select: 720P/D1 / HD1 /
CIF / 720P.
IPC test:Supports 4 IPC by a PON switch.
We will provide special manual for this.
Attention: Please keep the EN menu as OFF if there is no IPC camera.