SDS

Safety Data Sheet
Restor-A-Finish
SDS Revision Date:
08/20/2014
Page 5 of 12
Large Spill: As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all
directions.
Keep unauthorized personnel away.
Stay upwind. Keep out of low areas. Ventilate closed spaces before entering.
7. Handling and storage
7.1. Precautions for safe handling
Store in accordance with the National Fire Protection Association's publication NFPA 30, Flammable and
Combustible Liquids Code. 29 CFR 1910.106 applies to the handling, storage, and use of flammable and combustible
liquids.
See section 2 for further details. - [Prevention]:
7.2. Conditions for safe storage, including any incompatibilities
Handle containers carefully to prevent damage and spillage.
Incompatible materials: Strong oxidizing agents and acids.
See section 2 for further details. - [Storage]:
7.3. Specific end use(s)
No data available.
8. Exposure controls and personal protection
8.1. Control parameters
Exposure
CAS No.
Ingredient
Source
Value
0000067-63-0
Isopropyl Alcohol
OSHA
TWA 400 ppm (980 mg/m3) STEL 500 ppm
ACGIH
TWA: 200 ppm STEL: 400 ppm Revised 2003,
NIOSH
TWA 400 ppm (980 mg/m3) ST 500 ppm (1225 mg/m3)
Supplier
No Established Limit
0000067-64-1
Acetone
OSHA
TWA 1000 ppm (2400 mg/m3) STEL 2400 mg/m3
ACGIH
TWA: 500 ppm STEL: 750 ppm
NIOSH
250 ppm (590 mg/m3) TWA
Supplier
No Established Limit
0000078-93-3
Butanone
OSHA
TWA 200 ppm (590 mg/m3)
ACGIH
TWA: 50 ppm STEL: 100 ppm
NIOSH
TWA 200 ppm (590 mg/m3) ST 300 ppm (885 mg/m3)
Supplier
No Established Limit
0001330-20-7
Xylene
OSHA
STEL 150 ppm
ACGIH
TWA: 100 ppm STEL: 150 ppm
NIOSH
No Established Limit
Supplier
No Established Limit
0012002-43-6
Asphaltum
OSHA
No Established Limit