Owner's manual
Document 2.4.95, Revision 0
May, 2013
5
Fluid-Filled Overhead Distribution Transformers
This document is intended as a general guide for
the installation, operation and maintenance of
Howard Industries uid-lled, overhead distribution
transformers. Although every effort has been
made to ensure accuracy and completeness, these
instructions do not address every conceivable
application or circumstance that might be
encountered. Features presented herein may not
be present in all transformer designs. Standard
and optional features are subject to change without
notice.
The instructions contained herein are applicable
to transformers operated in usual conditions as
specied in the “Usual Service Conditions” section
of IEEE Standard C57.12.00. Questions regarding
installation, operation, and maintenance (particularly
when encountering unusual or special circumstances
not sufciently covered by these instructions) should
be directed to the Howard Industries Transformer
Division.
IT IS IMPORTANT TO READ AND COMPLY WITH ALL
SAFETY INFORMATION AND WARNINGS DISPLAYED
THROUGHOUT THESE INSTRUCTIONS BEFORE
ATTEMPTING ANY INSTALLATION, OPERATION, OR
MAINTENANCE ACTIVITIES.
SECTION 1: INTRODUCTION