MSDS

MATERIAL SAFETY DATA SHEET
Butcher Block Conditioner MSDS DATE: 06/16/11
PAGE 2 OF 3
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
Eye/Face Protection: No special eye protection is normally required. Where splashing is possible, wear safety glasses with side shields
as a good safety practice.
Skin Protection: No special protective clothing is normally required. Where splashing is possible, select protective clothing
depending on operations conducted, physical requirements and other substances in the workplace. Suggested
materials for protective gloves include: Nitrile Rubber, Silver Shield, Viton.
Respiratory Protection: No respiratory protection is normally required.
Occupational Exposure Limits:
Component Agency TWA STEL Ceiling Notation
White Mineral Oil ACGIH 5 mg/m3 10 mg/m3 --- ---
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Attention: The data below are typical values and do not constitute a specification.
COLOR: Light tan
PHYSICAL STATE: Gel
ODOR: Odorless
pH: Not applicable
VAPOR PRESSURE: <0.1 mm of Hg (20˚C)
VAPOR DENSITY (AIR=1): >1
BOILING POINT >1
SOLUBILITY: Negligible Solubility in cold water
FREEZING POINT Not applicable
MELTING POINT: Not available
SPECIFIC GRAVITY: 0.84
SECTION 10: STABILITY AND REACTIVITY
CHEMICAL STABILITY: This material is considered stable under normal ambient and anticipated storage and handling conditions of
temperature and pressure.
INCOMPATIBILITY WITH OTHER MATERIALS: May react with strong oxidizers
HAZARDOUS DECOMPOSITION PRODUCTS: None known (None expected)
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
SENSITIVITY TO MECHANICAL IMPACT: No
SECTION 11: TOXICOLOGICAL INFORMATION
IMMEDIATE HEALTH EFFECTS
Eye Irritation: The eye irritation hazard is based on evaluation of data for similar materials or product components.
Skin Irritation: The skin irritation hazard is based on evaluation of data for similar materials or product components.
Skin Sensitization: The skin sensitization hazard is based on evaluation of data for similar materials or product components.
Acute Dermal Toxicity: LD50: >5g/kg (rat). The acute dermal toxicity hazard is based on evaluation of data for similar materials or product
components.
Acute Oral Toxicity: LC50: >5000 mg/kg (rat) The acute oral toxicity hazard is based on evaluation of data for similar materials or product
components.
Acute Inhalation Toxicity: The acute inhalation toxicity hazard is based on evaluation of data for similar materials or product components.
For additional information on the acute toxicity of the components, call the technical information center.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICITY:
The toxicity of this material to aquatic organisms has not been evaluated. Consequently, this material should be kept out of sewage and
drainage systems and all bodies of water.
ENVIRONMENTAL FATE:
This material is considered inherently biodegradable. This material is not expected to present any environmental problems other than those
associated with mineral oil spills. This material is not expected to be readily biodegradable. See Section 6 for Accidental Release Measures.