SDS

Safety Data Sheet
Cutting Board Oil
Reference Number: HOW-113_Cutting Board Oil
SDS Revision Date:
08/12/2015
Page 3 of 6
7. Handling and storage
7.1. Precautions for safe handling
See section 2 for further details. - [Prevention]:
7.2. Conditions for safe storage, including any incompatibilities
Handle containers carefully to prevent damage and spillage.
See section 2 for further details. - [Storage]:
7.3. Specific end use(s)
No data available.
8. Exposure controls and personal protection
8.1. Control parameters
There are no ingredients in this product which are classified as hazardous.
8.2. Exposure controls
Respiratory
If exposed to concentrations above the exposure limit use the appropriate respirators.
Eyes
Safety glasses with side shields
Skin
Wear overalls to keep skin contact to a minimum. Impervious rubber gloves
Engineering Controls
Provide adequate ventilation.
Other Work Practices
Use good personal hygiene practices.
See section 2 for further details. - [Prevention]:
9. Physical and chemical properties
Appearance
Colorless Liquid
Odor
Odorless
pH
Not Applicable
Initial boiling point and boiling range
> 500 F (260 C)
Flash Point
265 F (129 C) (COC)
Evaporation rate (Ether = 1)
Not Available
Upper/lower flammability or explosive limits
Not Applicable
Vapor pressure (Pa)
< 0.01 mmHg @ 100 F (37.8 C)
Vapor Density
> 1
Specific Gravity
0.82 -0.86 @ 60.1 F
Solubility in Water
Soluble in hydrocarbons, insoluble in water.
Auto-ignition temperature
Not Available
Decomposition temperature
Not Available
Viscosity (cSt)
7.5 cSt - 90 cSt @104 F (40c) (min)
9.2. Other information No other relevant information.