HELMETS SAVE RAVEN) Always wear a properly fitted helmet tho complies with CPS or CE safety standards when you ride your scooter. Correct Fitting: Make sure your helmet covers your forehead. Incorrect Fitting: Forehead is exposed and vulnerable to serious Injury.
WARNING! PLEASE READ THE USER MANUAL THOROUGHLY. Allure fo follow the basic instructions and safely precautions listed In the user manual can lead fo damage fo your device, other properly damage, serious bodily injury, and even death. Thank you for purchasing the Hover-1 RANGER PRO Electric Scooter. Please read all instructions carefully before using and retain this manual for future use and reference. This manual applies fo the RANGER PRO Scooter.
LOW TEMPERATURE WARNING Low temperature will affect the lubrication of moving parts inside the overboard scooter, increasing internal resistance. At the same dime, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased. Use caution when riding the overboard in cold temperatures {below 40 degrees F).
= Do not operate or allow others to operate the overboard until the user understands all instructions, wakings and safety features described in this manual, « Check with your doctor if you have a medical condition that could affect your ability fo use the overboard. » Persons with head, back or neck ailments or prior surgeries to those areas of the body are not recommended to use the overboard.
INTRODUCTION The overboard is a personal transporter. Our technology and production processes are developed with strict testing for each overboard. Operating the overboard without following the contents of this manual may lead to damage to your overboard, or bodily injury. This manual is designed to give you the information you need for the safe operation and maintenance of your overboard. Please read it thoroughly before riding your overboard.
OPERATING PRINCIPALS The device uses digital electronic gyroscopes and acceleration sensors to control balance and motion, depending on the user's center of gravity. The device also uses a control system to drive the motors that are located within the wheels. The device has a built-in inertia dynamic stabilization system that can help assist with balance when moving forward and backwards, but not while fuming.
CONTROLS AND DISPLAY PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY TURNING YOUR DEVICE ON/OFF Power On: Take your device out of the box and place it flat on the floor. Press the power button {located on the rear of your device) once. Check the LED indicator {located in the center of your device). The battery indicator light should be lif, indicating the device is powered on. Power Off: Press the power button once. This model also has self-balance function.
BLUETOOTH SPEAKER The overboard has a powerful built-in wireless speakers so you can play your music while riding. PAIRING THE SPEAKER 1} Tum on your overboard and the speakers will “Ping” fo announce that it's waiting for a Bluetooth® connection. This will indicate your overboard speaker is now in pairing mode. 2} Place the overboard and the Bluetooth® device to which you would like fo pair it within the operating distance. We recommend keeping the two devices no further than 3 feet apart during pairing.
SMART PHONE APP Your overboard is an App-enabled scooter that works with Apple iOS and Android devices. Download the free Hover-1 App in order to access certain features of your overboard such as GPS and skill mode, Using o GR code reader, hold the camera on your smartphone over the below QR code to download the Hover-1 App.
BEFORE RIDING iris important that you fully understand all elements of your overboard. If these elements are not used correctly, you will not have full control of your overboard. Before you ride, lean the functions of the various mechanisms on your scooter, Practice using these elements of your overboard of slower speeds in a flat, open area before taking the device out in public areas. PER-RIDE CHECKLIST Ensure that your overboard Is in proper working order each and every ime you ride.
SAFETY PRECAUTIONS Different localities and countries have different laws governing riding on public roads, and you should check with local officials fo ensure you are complying with these laws. Hover-1 is not liable for tickets or violations given fo riders who do not follow local laws and regulations, » For your safety, always wear a helmet that meets CPS or CE safety standards.
SAFETY CHECKLIST » Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your overboard. « Before stepping on your overboard, make sure iris placed flat on level ground, the power is on, and the Running Indicator light is green. Do not step on if the Running Indicator light is red. » Do not try to open or modify your overboard. Doing so, voids the manufacturer warranty and may cause your overboard to fall, resulting in injury or death.
» Do not attempt to jump on or off your overboard. » Do not attempt any stunts or tricks with your overboard. = Do not ride the overboard in dark or poorly it areas, « Do not ride the overboard off road, near or over potholes, cracks or uneven pavement or surfaces. » Keep in mind that you are 4.5 inches {11.43 cm) taller when operating the overboard. Make sure fo go through doorways safely, » Do not turn sharply, especially at high speeds. = Do not step on the fenders of the overboard.
RIDING YOUR OVERBOARD FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. Before using your device, be sure to familiarize yourself with the operating procedures, OPERATING YOUR DEVICE Make sure the device §s fully charged before your inflation use, For charging instructions, please follow details under CHARGING YOUR DEVICE.
help you feel more secure. The overboard is an incredibly intuitive device; it senses even the slightest bit of motion, so having any anxiety or reservation about stepping on may cause you fo panic and digger unwanted movement, When you first begin using your device, the fastest way move in your desired direction is to focus in that direction. You will notice that just thinking about which way you would like to go will shift your center of gravity, and that subtle movement wil propel you in that direction.
Zao] [2H Try staying relaxed and focus on finding your center of gravity to maintain ful control of your overboard. Dismounting your device can be one of the easiest steps, yet when done incorrectly, may cause you to fall. To properly dismount, from a stopped position, lift one leg up and set your foot back down on the ground {STEPPING BACK]. Then step off completely as described in the following diagram.
A WARNING Overweight perfusion on the device may secrecy possibly of bury or product damage. i¢ NOTES: To prevent injury, when max speed Is reached, the overboard wil beep to alert the user and Hit the rider slowly back. OPERATING RANGE The overboard can rave! g distance up to 8 miles on a fully charged battery in ideal conditions. The following ore some of the major factors that will affect the operating range of your device. « Terrain: Riding distance is highest when riding on a smooth, flat surface.
SAFETY ALERTS While riding your overboard, If there Is a system error or legal operation performed the device will prompt the user in a variety of Ways. You will notice the Running Indicator Light will tum RED and you will hear a beep sound fingerling you to take precaution and cease operation, which may make the device stop suddenly. The following are common occurrences where you will hear the Safety Alerts.
= While sustaining a high discharge current during use {such as driving up a steep slope for a long period of time), the device engine will power off and stop after 15 seconds. A WARNING When the overboard tums off during a Safety Alert, all operation systems will hat. Do not continue attempting to ride the overboard when the system follicles a stop. Tum your overboard off and back onto unlock it from a Safely Lock.
CHARGING YOUR OVERBOARD CHARGING THE DEVICE » ensure that the charging port is clean and dry. « make sure that there Is no dust, bordellos or dirt inside the port. « plug the charger info a grounded wall outlet. The charging indicator light on the charger will be green. = connect the cable with the power supply (100v ~ 240v; 50/40 hz). « align and connect the 3-pin charging cable info the charging port of the overboard.
* Do not continue charging the battery if it does not recharge within the specified charging dime. Doing so may cause the battery fo become hot, rupture, or ignite. To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary rash. Consult your local waste authority for information regarding available recycling and/or disposal options.
CARE & MAINTENANCE + Do not expose the device to liquid, moisture, or humidity fo avoid damage to the product's internal circuitry. * Do not use abrasive cleaning solvents to clean the device. = Do not expose the device to extremely high or low temperatures as this will shorten the fife of the electronic device, destroy the battery, and/or distort certain plastic parts. = Do not dispose of the device in fire as it may explode or combust.
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: {1} This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
