User Manual

SAFETY PRECAUTIONS
The rst rule in safe riding is to use common sense. A Hover-1 Buggy is vulnerable; it cannot protect you in a crash,
against impact, or loss of control the way driving a car can. A Hover-1 Buggy can tip over sideways or pitch you
over the front wheel. It moves faster than a typical scooter. It does not have bumpers or airbags as a car does. This
section is a guide of safe riding practices for operation. Make sure you are using your Hover-1 Buggy properly.
Dierent localities and countries have dierent laws governing riding on public roads, and you should check with
local oicials to ensure you are complying with these laws.
Hype is not liable for tickets or violations given to riders who do not follow these regulations.
• For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a
helmet can protect you from serious injury and in some cases, even death.
• Obey all local laws, stop signs, pedestrian crosswalks, etc.
• If riding with friends and multiple Hover-1 Buggys, ride single le in a straight line.
• Have a satisfactory signaling device (bell, horn, etc.) to warn drivers and pedestrians of your approach.
• Ride defensively; expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians and alert them if you intend to pass them from behind.
4. Align the holes of plate with the seat frame, secure the plate using the allen wrench, Screw with Washer.
5. Adjust both adjustable straps so that they are secured tightly around your scooter.
6. Your Hover-1 Buddy should be properly installed onto your scooter as shown below.
1114