User Manual

1. This product is strictly forbidden to use on roads and highways. You must wear a safety helmet, knee and elbow
pads and other necessary protective gear when riding your Hover-1 Buggy.
2. Due to the particularity of the product, the assembly pieces are to be checked before every ride to avoid an
accident while riding.
3. Do not make a sharp turns as you may drift and over-turn the Hover-1 Buggy which can result in injury to yourself
and/or damage the unit.
INSTALLING YOUR HOVER-1 BUGGY
If you have questions or concerns about any of these steps, please feel free to contact our Customer Service
Team at [e-mail]. Someone will be in touch to walk you through these steps.
Carefully follow the steps shown on the following pages for installing the Hover-1 Buggy onto your electric
scooter. Read the remainder of this manual before riding your Hover-1 Buggy.
Your Hover-1 Buggy should be completely assembled prior to installing it onto your electric scooter. Please
refer to the “Assembling your Hover-1 Buggy” section for assembling procedures.
1. Place the pedal mounts onto the foot pedals of your self-balancing scooter with the front wheel facing
forward. Ensure the pedal mounts are centered on the foot pedals of your scooter as much as possible.
916