刀线，不印刷 材质：Cover of the manual should be 350g matte + silver foil logo Inner paper is 250g cmyk printing 正反面印刷，装钉成册 说明书外表面要套一个CPE磨砂袋
Buggy E L E C T R I C S CO OT E R S E AT www.Hover-1.
buggy E L E C T R I C S CO OT E R S E AT Operation Manual HY-H1-BGY IMPORTANT: KEEP FOR FUTURE REFERENCE *Images used in this manual may vary slightly from the product and are for reference purposes only. Even if you have ridden a scooter for years, it is important for you and every rider to read this manual before using this product.
WARNING HELMETS SAVE LIVES! Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter. Incorrect Fitting: Forehead is exposed and vulnerable to serious injury. Correct Fitting: Make sure your helmet covers your forehead.
5) Once HypeTM has received the product, it will meet its warranty obligations in accordance with the warranty conditions and will return the product to the sender with carriage and insurance paid. SERVICE OUTSIDE OF WARRANTY HypeTM can refuse any service claim made that is not covered by the warranty. If HypeTM agrees to provide a service outside the warranty, the customer will be invoiced for all repair and transport costs.
PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE, OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, PROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH THE PRODUCT AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF
PARTS LIST (H) Marginal differences compared to the target appearance and workmanship provided these have a negligible effect on the Product’s fitness for use. *Warranties that have not been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the warranty period for the entire product.
ASSEMBLING YOUR HOVER-1 BUGGY If you have questions or concerns about any of these steps, please feel free to contact our Customer Service Team at support@Hover-1.com. Someone will be in touch to walk you through these steps. Carefully follow the steps shown on the following pages for assembling the Hover-1 Buggy. Remove all Hover-1 Buggy contents from the box. Ensure all contents from the “Parts List” section are accounted for. 1. Locate the 4 foam pads and both handle bars.
WARRANTY HypeTM offers a 90 day limited warranty covering the hardware of Hover-1™ Buggy (referred to as “Product” here on out), limited to those residing in the 50 US States and Canada. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. The warranty does not cover any issues, damages or circumstances related to your self-balancing scooter. 2. Locate the provided 8*35 Screw and 8mm Nut.
4. Align the holes of the seat with the seat frame. Secure the seat in place using the allen wrench, 8*12 Screws and 8mm Nut. RIDING YOUR HOVER-1 BUGGY Ensure your Hover-1 Buggy is fully assembled and correctly installed onto your scooter with all straps and screws secured in place. Ensure your scooter is properly maintained as well. Failure to do so may result in serious bodily harm or death and damage to the unit.
1. This product is strictly forbidden to use on roads and highways. You must wear a safety helmet, knee and elbow pads and other necessary protective gear when riding your Hover-1 Buggy. INSTALLING YOUR HOVER-1 BUGGY 2. Due to the particularity of the product, the assembly pieces are to be checked before every ride to avoid an accident while riding. If you have questions or concerns about any of these steps, please feel free to contact our Customer Service Team at support@Hover-1.com.
2. Secure your Hover-1 Buddy to your self-balancing scooter using both adjustable straps with Velcro. With the facing outward, attach one hook of each adjustable strap to the back of each pedal mount. • Slow down at all street intersections and look to the left and right before crossing. •Obey all traffic signals. • Always use proper hand signals for turning and stopping. Give signals 100ft before stopping or turning and always return both hands to the handle bars before stopping or turning.
SAFETY PRECAUTIONS 4. Align the holes of plate with the seat frame, secure the plate using the allen wrench, Screw with Washer. The first rule in safe riding is to use common sense. A Hover-1 Buggy is vulnerable; it cannot protect you in a crash, against impact, or loss of control the way driving a car can. A Hover-1 Buggy can tip over sideways or pitch you over the front wheel. It moves faster than a typical scooter. It does not have bumpers or airbags as a car does.
BEFORE RIDING WARNING Any scooter that does not work properly can cause you to lose control and fall. Inspect the entire device thoroughly before every ride, and do not ride it until any problems have been corrected. PRE-RIDE HOVER-1 BUGGY CHECKLIST Ensure that your Hover-1 Buggy and scooter are in proper working order each and every time you ride. If a part of the Hover-1 Buggy does not function correctly, please contact our Customer Support Center.
