JHE, TE HE: Cover of the manual should be 350g matte + silver foil logo Inner paper is 250g economy printing GREENERY, Ta HAIRS EE EE— CPE
ELECTRIC SCOOTER ACCESSORY Operation Manual H1-TRB-CMB Go-Kart IMPORTANT; KEEP FOR FUTURE REFERENCE “images used in this manual may vary sightly from the product and are for reference purposes only.
A Te HELMETS SAVE LIVES! Always wed a proper fitted helmet that complies with CPS or CE safety standards when you (lo [= oT Eel eTe Th ene he Correct Filling: Forehead is exposed and eT gh vulnerable fo serious Injury.
ji telnlilagjial,] This manual is designed to give you fhe information you need for the safe operation and maintenance of your new Hover-1 Go-Kart. Please read it thoroughly before riding your Hover-1 Go-Kart. Make sure you read this complete manual before riding your Hover-1 Go-Kart. Failure failure to follow its guidelines could lead to serious injury or death. » Section One of this manual involves safety and Hover-1 Go-Kart care.
HOVER-1 GO-KARI DIAGRAM 1. Adjustable Seat 2. Handle Bars 3. Pedal Mounts 4, Elastic Strap 5. Seat Frame &. Twist Knob 7, Frame Extension 8. Foot Rests 9. Caster Wheel 10. Flag SPECIFICATIONS Compatibility: Most 6.
VAR RRS seem | (2 Set Hook & Loop {1) Seat Base+Seat Frame EEE Straps with Rubber Protectors Reassembled {1} Seat Buck+Seat Back Frame {2) Twist Knob | —zr (1) Frame extension A {2) Large Screws (1) Right Handle Bar (1) Left Handle Bar © {2} Lorie Washers Allen Wrench Set: {1) 5mm wheel change IN {1} Flag Set {1) émm seat frame assembly
ASSEMBLING YOUR HOVER-1 GO-KEY if you have questions or concerns about any of these steps, please feel free to contact our Customer Service Team at Someone will be in touch fo walk you through these steps. Carefully follow the steps shown on the following pages for assembling the Hover-1 Go-Kart. Remove dll Hover-1 Go-Kart contents from the box. Ensure all contents from the “Pars List" section are accounted for. 1. Find the 2 handles in the box and prepares for assembly.
3. Insert the frame extension Info the sect frame. Adjust fo preferred length. Secure the frame extension in place using one twist knob.
4. Insert the seat back frame info the seat Fame. Adjust to preferred length. Secure the sect back frame In claps using ons twist knob. 5. Your Hover-1 Go-Kart is now completely assembled and should look lke the below Image.
INSTALLING YOUR HOVER-1 GO-KART If you have questions or sconce about any of these steps. please feel free fo contact our Customer Service Team at Someone will be in touch to walk you through these steps. Carefully follow the steps shown on the following pages for installing the Hover-1 Go-Kart onto your electric scooter. Read the remainder of this manual before riding your Hover-1 Go-Kart. Your Hover-1 Go-Kart should be completely assembled prior fo installing it onto your electric scooter.
2. Secure your Hover-1 Go-Kart to your self-balancing scooter using both adjustable straps with rubber protectors. Attach one end of each strap to the holes on the front of each pedal mount as shown below. NE 3. Wisp one set of adjustable straps under your eff-balancing scooter and attach the ends of the straps on the back of each pedal mount.
4. WARNING: Do not over-tighten straps when you are assembling your go-kart to your scooter. Ensure that the go-kart is secure to the scooter when attaching. Ensure the foam pads are attached fo the bottom of the pedal mounts so that the go-kart does not touch the fool pad sensors on the scooter. See below diagram for correct fitting.
BEFORE RIDING Any scooter that does not work properly can cause you to lose control and fall. Inspect the entire device thoroughly before every ride, and do not ride if until any problems have been complected, HOVER-1 GO-KART OPERATION it Is important that you fully understand aif elements of your Hover-1 Go-Kart.
PER-RIDE HOVER-1 GO-KART CHECKLIST Ensure that your Hover-1 Go-Kart and scooter are in proper working order each and every dime you ride. fa part of the Hover-1 Go-Kart does not function compactly, please contact our Customer Support Center, « Ensure the battery of your scooter is fully charged before riding your Hover-1 Go-Kart. » Ensure that the screws on the Hover-1 Go-Kart are fitly secured before each ride. » Check to ensure the tires of your scooter are not wom.
SAFETY PRECAUTIONS The first rule in safe riding is fo use common sense. A Hover-1 Go-Kart is vulnerable; it cannot protect you ina crash, against impact, or loss of control the way driving a car can. A Hover-1 Go-Kart can fip over sideways ar pitch you aver the front wheel. it moves faster than a typical scooter. It does not have bumpers or airbags as a car doss. This section is a guide of safe riding practices for operation. Make sure you are using your Hover-1 Go-Kart properly.
« Slow down at all street intersections and look fo the left and right before crossing. «Obey all traffic signals, = Always use proper hand signals for fuming and stopping. Give signals 100ft before stepping or fuming and always return both hands to the handle bars before stopping or turning. * Watch for cars pulling out info traffic and for the sudden opening of car doors. * Avoid potholes, drainage grates or other hazards. + Be careful when riding on soft read edges. gravel, sand and uneven surfaces.
1. This product is strictly forbidden to use on rods and highways, unless your cola! laws state otherwise, You must wear a safety halftime, knee and elbow pads and other necessary protective gear when riding your Hover-1 Go-Karl, 2, Due to the particularity of the product, the assembly pieces are to be checked before every ride to avoid an accident while riding. 3.
RIDING YOUR HOVER-1 GO-KART Ensure your Hover-1 Go-Kart is fully assembled and correctly installed onto your scooter with all straps and screws secured in pace, Ensure your scooter is properly maintained as well. Zaire fo do so may result in serious bodily ham or death and damage to the unit. After reviewing the per-ride checklist, follow the steps below to begin riding your Hover-1 Go-Kart. 1. Tum on your scooter. 2. 8it comfortably in the Hover-1 Go-Kart seat. 2. Place your feet onto the goof rests. 3.
LL For warranty information, Please visit us at: www WERE DIRECTIVE | Following information is only for EU-member states: The mark shown to the right 5 in compliance with the Waste Hectically and Electronica Equipment Directive 2012/19/EU (WEE. The mark indicates the requirement NOT fo dispose the equipment as unsorted municipal waste, but use the rectum and collection systems according to local law.
