User Manual

CHARGING THE DEVICE

• Ensure that the charging port is clean and dry.

• Make sure that there is no dust, debris or dirt inside the port.

• Plug the charger into a grounded wall outlet. The charging

indicator light ON THE CHARGER indicates as a RED light if your My

First E-Bike is not fully charged.

• Connect the cable with the power supply (100-240V; 50/60 Hz).

• Align and connect the charging cable into the charging port of

the My First E-Bike, which is located under the frame. DO NOT

FORCE OR BEND THE CHARGING CABLE INTO THE CHARGING PORT,

AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK.

• Once attached to the board, the charging indicator light ON THE

CHARGER should be flashing in GREEN color, indicating that your

device is now being charged.

• When the RED light on your charger turns GREEN, then your My First

E-Bike is fully charged. A full charge may take up to 3 hours, While

charging you will see a RED light.

• A full charge may take up from 2 to 3 hours. Do not charge for

more than 12 hours.

•After fully charging your My First E-Bike, unplug the charger from

your My First E-Bike and from the power outlet.

CHARGING YOUR MY FIRST E-BIKE