ELECTRIC FOLDING SCOOTER JIVE O P E R AT I O N M A N UA L H1-JVE
HELMETS SAVE LIVES! Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter. Correct Fitting: Make sure your helmet covers your forehead. Incorrect Fitting: Forehead is exposed and vulnerable to serious injury.
WARNING As with all mechanical components, the Hover-1 Jive is subjected to wear and high stresses. Different materials and components may react to wear or fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider. Any form of crack, scratch or change of coloring in highly stressed areas indicate that the life of the component has been reached and it should be replaced. Do not ride in an abusive manner.
WARNING! PLEASE READ THE USER MANUAL THOROUGHLY. Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your device, other property damage, serious bodily injury, and even death. Thank you for purchasing the Hover-1 Jive. Please read all instructions carefully before using and retain this manual for future use and reference. This manual applies to the Hover-1 Jive.
LOW TEMPERATURE WARNING Low temperature will affect the lubrication of moving parts inside the Jive, increasing internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased. Use caution when riding the Jive in cold temperatures (below 40 degrees F).
• Do not operate, or allow others to operate, the Hover-1 Jive, until the user understands all instructions, warnings and safety features described in this manual. • Check with your doctor if you have a medical condition that could affect your ability to use the Hover-1 Jive. • Persons with head, back or neck ailments or prior surgeries to those areas of the body are not recommended to use this Hover-1 Jive. • Do not operate if you are pregnant, have a heart condition, or have both.
INTRODUCTION This manual is designed to give you the information you need for the safe operation and maintenance of your new Jive scooter. Please read it thoroughly before riding your Jive. WARNING Make sure you read this complete manual before riding your Hover-1 Jive. Failure to do so, or failure to follow its guidelines could lead to serious injury or death. The Jive is a personal transporter. Our technology and production processes are developed with strict testing for each Jive scooter.
• Obey all local traffic laws. Obey red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc. • Ride with the traffic, not against it. • Ride defensively; expect the unexpected. • Give pedestrians the right-of-way. • Do not ride too close to pedestrians and alert them if you intend to pass them from behind. • Slow down at all street intersections and look to the left and right before crossing. Your Jive electric folding scooter is not equipped with reflectors.
• Do not try to open or modify your Jive scooter. Doing so, voids the manufacturer warranty and may cause your Jive to fail, resulting in injury or death. • Do not use the Jive in a manner that would put people or property in danger. • If you and your friend(s) are riding Jive scooters together, be sure to keep a safe distance between each other to prevent collisions,property damage, serious injuries or even death. • Be sure to keep your feet on the scooter at all times.
WARNING Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential injury, do not apply sudden or excessive force to your brakes. Apply your brakes gradually and give yourself enough room to come to a complete stop safely. and carry your Jive. ALWAYS BE ON THE SIDE OF CAUTION. • Do not attempt to ride over bumps or objects greater than ½ in. even when prepared and bending your knees.
WARNING When you ride in low-visibility conditions such as fog, dusk, or night, you might be difficult to see, which could lead to a collision. In addition wear bright, reflective clothing when riding in poor lighting conditions. • Do not attempt any stunts or tricks with your Jive scooter. • Do not ride the Jive in dark or poorly lit areas. • Do not ride the Jive near or over potholes, cracks or uneven pavement or surfaces. • Do not operate your Jive scooter off-road.
WARNING To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider. WARNING To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider.
BATTERY CARE / MAINTENANCE BATTERY SPECIFICATIONS Battery Type: Rechargeable lithium-ion battery Charge Time: Up to 5 hours Battery Voltage: 36V Battery Capacity: 6 Ah Working Temperature: 32°F - 104°F Charging Temperature: 32°F - 104°F Storage Time: 1 year Storage Temperature: -4°F - 104°F Storage Humidity: 5% - 95% BATTERY MAINTENANCE The lithium-ion battery is built into the device. Do not disassemble the device to remove the battery or attempt to separate it from the device.
• Do not attempt to modify, change, or replace your battery. • Do not use your device if the battery begins to emit odor, overheats, or begins to leak. • Do not touch any leaking materials or breathe fumes emitted. • Do not allow children and animals to touch the battery. • The battery contains dangerous substances, do not open the battery, or insert anything into the battery. • Please only use the charger provided by Hover-1.
SPECIFICATIONS Model: Net Weight: Max Supported Weight: Min Supported Weight: Max Speed: Max Distance Range Battery Type: Motor Power: Battery Voltage: Battery Capacity: Power Requirement: Folding Size: Open Size: Tire Type: Tire Size: Tire inflation pressure: Brake Type: H1-JVE 26.0 lbs (11.8 kg) 264 lbs (120 kg) 44 lbs (20 kg) Up to 16 mph (25 km/h) Up to 16 miles (25 km) Lithium-ion 300W Brushless Motor 36 V 6Ah AC 100-240V, 50/60 Hz (41.7in. x 16.9in. x 18.8in.) (106cm x 43cm x 47.8cm) (41.7in. x 16.
HOVER-1 JIVE DIAGRAM 5 1 2 7 3 6 8 4 9 10 11 13 12 FEATURES/PARTS 1. LED Display 2. Bell 3. Brake Handle 4. Handlebars(L) 5. Handlebars(R) 6. Throttle 7. Power Button 8. Folding Clip 14 9. Steering Column 10. Folding Lock 11. Scooter Platform 12. Kickstand 13. Folding Hook 14.
HOVER-1 JIVE DIAGRAM BRAKE HANDLE THROTTLE FOLDING CLIP LED DISPLAY POWER BUTTON LED DISPLAY SPEEDOMETER km/h Displays your current speed in Mph. Ensure it is power on, Press twice to switch low speed /Mid speed/ high speed mode: Eco- Low speed mode D- Mid speed mode S- High speed mode Under Low speed mode, the max speed is 13km/h(8mph), Under Mid speed mode, the max speed is 20km/h(12mph), Under High speed mode, the max speed is 25km/h(16mph).
CHARGING YOUR JIVE CHARGING THE DEVICE • Ensure that the charging port is clean and dry. • Make sure that there is no dust, debris or dirt inside the port. • Plug the charger into a grounded wall outlet. • Connect the cable with the power supply (100V ~ 240V; 50/60 Hz). • Align and connect the 1-pin charging cable into the charging port of the Jive Scooter. (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK.
PREPARING YOUR SCOOTER PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY ATTACHING THE HANDLEBAR KIT Attach the handle bar kit by placing it into the steering column, align the front and back screw holes, and tighten the 4 screws into place. PINCH POINTS Some parts of your Hover-1 Jive can injure you if mishandled. Moving and folding parts can cut skin. Clamps and pivoting parts such as brake levers can pinch.
FOLDING & UNFOLDING FOLDING & UNFOLDING YOUR JIVE SCOOTER. To unfold your Jive, press down on the folding clip and pull the steering column up. Raise the safety lock up and push it into place to secure the steering column. You will hear a “click”, indicating the steering column is locked. Ensure the steering column is secured in place. R WE LO FOLDING HINGE RAI SE O R Release folding clip to fold steering column HIGH SPEED MODE To active high speed mode, ensure the Jive is powered on and not in motion.
BEFORE RIDING Before each cycle of operation, the operator shall perform the pre-operation checks specified as below: • That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition. • That the area that the unit is to be operated in is safe and suitable for safe operation. • That the braking system is functioning properl. • That all safety labels are in place and understood by the operator and any passenger.
RIDING YOUR JIVE SCOOTER FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. OPERATING YOUR DEVICE Make sure the device is fully charged before the first initial use. Before turning on your Jive scooter, ride it like a normal kick scooter to get comfortable with the device before using it with the motor.
operating range of your device. • Terrain: Riding distance is highest when riding on a smooth, flat surface. Riding uphill and/or on rough terrain will reduce distance significantly. • Weight: A lighter user will have further range than a heavier user. • Ambient temperature: Please ride and store the device under recommended temperatures, which will increase driving distance; battery life, and overall performance of your device.
• Battery voltage is too low. • The device is still charging. • Overheating, or motor temperature is too high. • When the b attery is about to run out of power, the battery icon will flash. • If any or both tires are blocked, the device will stop after 10 seconds. • When the battery level has depleted below protection mode, the device motor will power off after 15 seconds.
WARRANTY For warranty information, Please visit us at: www.hover-1.com Error E1- Motor Hall failure Error E2 - MOS tube failure Error code E3 - Brake failure Error E4/MOS - Accelerator failure Error codes Error E5 - low-Overvoltage failure Error E6 - Controller/instrument communication failure Error E7 -Overvoltage protection Error E8 - Operational amplifier failure Error E9 - Blocking fault Manufacturer: DGL Group, Ltd.
@RideHover1 @RideHover1 @RideHover1 www.Hover-1.
