Owner's Manual

LED DISPLAY
ERROR CODES
The electronics system has the ability to self-diagnose and report a limited set of
errors. Errors will appear on the screen as error codes.
The chart below explains the meaning of each error code:
E9 Controller Error
Controller error. Restart the scooter.
ADVANCED MATRIX DISPLAY  ERROR CODE CHART
E1 Brake Error
Error Code Error Solution
Brake assembly failure, or
communication error with the
controller.
E2 Accelerator Error
Accelerator assembly failure, or
communication error with the
controller.
E3
Communication
Error
Communication error between the
instrument panel and the controller.
Damaged wire or loose connector, or
faulty instrument panel or controller.
E6
Over Voltage
Protection
Battery voltage is too high.
Battery has a fault.
E7 Hall Error
Loose/Disconnected motor connector,
damaged motor wire or faulty motor.
31 32
HEADLIGHT
ECO MODE
DRIVE MODE
SPORT MODE
MILEAGEBLUETOOTH
BRAKE
PEDESTRIAN MODE
LOCK
CRUISE CONTROL
KICK TO START MODE
mile
km
TRIP
SPEED