Project Ideas

Stationary Holder
The Finished Product!
Instructions;
1) Measure your stationary holder and cut your mosaic tile to
size where necessary. Dry lay to make sure you're happy
with the pattern,
2) Use a hot glue gun to adhere. (Fine for this project,
however please use a suitable tiling mortar when tiling a wall)
3) Once the glue has dried, grout the mosaic tile,
4) Smooth into place and wipe away any excess with a grout
sponge,
5) Let the grout dry.
6) Complete!
Mosaic Tile
Wooden stationary holder
(or cut MDF to size!)
Scissors
Glue Gun
Grout & grouting equipment
e.g sponge, grout float
Stationary!
Equipment;