User Manual

CONNECTING TO A TURNTABLE VIA RCA LINE IN

(STIR IT UP – EM-JT000)

1. Follow the setup instructions in this manual.

2. Ensure the Turntable is setup as per the turntable setup instructions

3. Connect the RCA to RCA cable (provided) into the back of the turntable.

Then put the red RCA cable into the right Get Together Duo speaker, and

the white RCA cable into the left speaker.

4. Now turn the left speaker on, then press the power button

twice until the left LED is purple.

5. Now turn on the right speaker and press the power button

twice until the right LED is purple.

6. You are now in the RCA in mode. Now play a vinyl on your

turntable and it will be played by the Get Together Duo’s.

PLAYING VIA AUX IN (MONO)

1. Put the AUX cable into the speaker and

the device you want to play the audio

from.

2. Turn on the speaker.

3. Press the power button once, until the

left LED is red. This is now in AUX mode

and will play via AUX.

Note: this will currently play in mono mode. If you want to play AUX in true wireless

stereo follow “Advanced RCA Line In/AUX Setup”

ADVANCED RCA LINE IN/AUX SETUP

1. Follow the setup instructions in this manual.

2. Connect the both RCA connectors/or AUX to the left speaker (master)

3. Then turn on the left speaker and select the mode you want. 1 press on the power

button = AUX (red LED), 2 press in the power button = RCA line in (purple LED)

4. Now turn on the right speaker, and ensure it is in Bluetooth mode (the left LED must be

blue). The LED should be ﬂashing meaning it is looking for the left speaker. If it does not

pair in 30 seconds, hold the Bluetooth button on the left main powered speaker until it

beeps. It will now search for the right speaker.

Note: if you turn the right speaker on and the LED is solid blue,

this means it is already connected to a device. To disconnect

this, press the Bluetooth and – button at the same time. The

left LED will now ﬂash blue. Now hold the Bluetooth button on

the left speaker to sync the 2.

5. You will now be playing via RCA/AUX on the left speaker and

stream the wirelessly via Bluetooth to the right speaker for

stereo sound.

OUT PUT

PRE-AMP

OFF ON