User Manual

SETUP

1. Take all the components out of the package and then place the product on a stable

surface.

2. Attach the current plug adapter to both the mains power cable and the USB C charger.

3. Charge the right USB C powered speaker until the battery is powered. (this has a

20-hour battery so does not need to be plugged in to use)

4. Attach the power cable to the left speaker. This always needs to be plugged in and

powered on to be used.

CONNECTING TO A MOBILE DEVICE VIA BLUETOOTH:

1. Follow the setup instructions

2. Turn the left and right speakers on, their left LED’s will be

ﬂashing Blue. They will now try and pair together, if 30 seconds

pass and you do not hear them connect (they will say “left

channel, right channel”. When paired together). Then hold the

Bluetooth button on the Left mains powered speaker, until it

beeps. The LED will now ﬂash red/blue. This will manually

make it ﬁnd the right speaker. They should now pair.

3. Open up the Bluetooth setting on your mobile device, and turn

your Bluetooth on

4. Then in available devices look for “Get Together Duo x 2”

5. Select this and you should then be paired.

6. You can now play audio via your mobile device and the

speakers will play.

CONNECTING TO A BLUETOOTH TURNTABLE

(STIR IT UP WIRELESS – EM-JT002)

1. Follow the setup instructions in this manual.

2. Ensure the Turntable is setup as per the turntable setup

instructions

3. Turn the left and right speakers on, their left LED’s will

be ﬂashing Blue. They will now try and pair together, if 30

seconds pass and you do not hear them connect (they will say

“left channel, right channel”. When paired together). Then hold

the Bluetooth button on the Left mains powered speaker, until

it beeps. The LED will now ﬂash red/blue. This will manually

make it ﬁnd the right speaker. They should now pair.

4. Now turn the turntable on and press the Bluetooth connect

button on the turntable. TIP: if using the Stir It Up Wireless,

wait 20 seconds – if it does not connect, press the Bluetooth

button again on the turntable to re-initiate the pair process.

When the turntable LED turns solid blue you are paired.

5. Now put on a vinyl and start streaming your music.