INSTRUCTION MANUAL GET TOGETHER DUO
BEFORE USE 1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors. 2. Do not open the cabinet as this may result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact Customer Service. 3.
UNDERSTANDING THE LEDS Connectivity status Power status LEFT SPEAKER CONNECTIVITY STATUS Connectivity status Power status RIGHT SPEAKER CONNECTIVITY STATUS Bluetooth Searching Bluetooth Searching Bluetooth Connected Bluetooth Connected AUX in Mode AUX in Mode RCA line in Mode RCA line in Mode POWER STATUS POWER STATUS Power Off Power Off Power On Power On Low Battery CONTROLS LEFT SPEAKER RIGHT SPEAKER
SETUP 1. Take all the components out of the package and then place the product on a stable surface. 2. Attach the current plug adapter to both the mains power cable and the USB C charger. 3. Charge the right USB C powered speaker until the battery is powered. (this has a 20-hour battery so does not need to be plugged in to use) 4. Attach the power cable to the left speaker. This always needs to be plugged in and powered on to be used. CONNECTING TO A MOBILE DEVICE VIA BLUETOOTH: 1.
CONNECTING TO A TURNTABLE VIA RCA LINE IN (STIR IT UP – EM-JT000) 1. Follow the setup instructions in this manual. 2. Ensure the Turntable is setup as per the turntable setup instructions 3. Connect the RCA to RCA cable (provided) into the back of the turntable. Then put the red RCA cable into the right Get Together Duo speaker, and the white RCA cable into the left speaker. 4. Now turn the left speaker on, then press the power button twice until the left LED is purple. 5.
TROUBLESHOOTING Speakers not pairing together: 1. Make sure the right battery powered speaker is fully charged. To do this use the UBC-C charger provided and plug into a power outlet. When you put it on charge, the right LED will solid RED. Once the battery is full the LED will turn off. 2. Make sure the left mains powered speaker is plugged into a power outlet and the outlet is switched on. 3. Turn on both speakers, their left LED should be flashing blue.
Marley and the Marley logo are registered trademarks of Fifty-Six Hope Road Music Limited and the use of such marks by House of Marley is under license. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by The House of Marley is under license. Operating frequency bands: 2402 - 2480MHz CE BT Max Power Transmitted Power: LEFT: EM-JA019L = 2.98dBm RIGHT: EM-JA019R = 4.
