Installation & Assembly

1. Place the backrest w/legs (#1)
onto a protected surface.
2. Prepare a bolt assembly
by first inserting a lock
washer (#D) onto the
bolt (#A) then a flat
washer (#E) onto that
same bolt (#A).
3. Align the seat (#2) to the hole
along the backrest w/legs (#1),
then insert the bolt assembly.
Secure using the Allen wrench.
1. Prepare 4 bolt assemblies
by first inserting a lock
washer (#D) onto the bolt
(#C) then a flat washer (#E)
onto that same bolt (#C).
2. Insert 2 bolt assemblies
into each back corner
of the seat (#2), Secure
using the Allen wrench.