Installation Instructions

1
Installation Instructions for
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
Screw the column to the top of the socket assembly.
Place the hub on top of the column and secure it in place by installing the spacer and screwing the upper finial onto the column.
Install the candle tubes by sliding them over the sockets.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Install the long beads by hooking them to the hub and fixture arms. Then install the short beads by hooking them from one
fixture arm to another.
Screw the lower finial to the bottom of the fixture.
1
2
3
4
5
1.0
Wall
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
6
7
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
1A
4
5
6
8
LOWER FINIAL
CANDLE TUBE
CANDLE FOLLOWER
COLUMN
LAMP
SOCKET
SHORT BEADS
HUB
LONG BEADS
FIXTURE ARM
UPPER FINIAL
SPACER
8
2
3
7
Wall